brick installation trusses

Bricking Machines, specialist in brick installation trusses. They have more than 50 years of experience, being benchmarks in the industry in terms of safety, efficiency and effectiveness in the production of light trusses thanks to their full aluminum manufacture. 

They have several models and sizes.

EZ Flexx50 Bricking Machine 

More than 4 meters

The Ez Flexx50 presents a flexible arch that allows a better adaptation inside the oven, reducing distortion.

The standard Bricking Machine comes in any size from a range of 2 meters and up to 4 meters, being customizable according to the needs of the plant.

It is not only the safest machine but also the best in its sector.

Ez Flexx50. Bricking Solutions

  • Frames and Structural Components: Constructed of 6061-T6 Aircraft Grade Aluminum
  • Part Design: Symmetrical with pin connections for quick and easy assembly.
  • Load Capacity: 4000 lbs. (8800 kg) standard and 4,3' (14 m) work platform. Allows 2 brick pallets (1.540 kg) plus men and equipment. The highest load capacity in the industry.
  • Optional 6000 kg (13 lb) load capacity and 200 m (5,2') work platform
  • Simple leveling screws allow easy adjustment of the distance between the bow and the housing
  • The ergonomic cutout key section, exclusive to Bricking Solutions, gives the key mason easy access to the lower kiln arch, providing a clear view for critical key brick installation.

 

EZ Flexx50 Small Bricking Machine.

Ez FLexx50 small size. Bricking Solution

From 3 to 4 meters.

It is the mini version of the Ez Flexx50, with the only difference being the reach and capacity.

  • Load capacity: 3000 kg (6600 lb) and 3,65 m (12') work platform. Allows 1 pallet of firebricks plus men and equipment. The highest load capacity in the industry
  • Full range of 3M – 4M or .5M ranges

 

Stepped Bricking Machine. 

From 4 to 6 meters.

Stepped Bricking Machine

It includes the key benefits of the Es Flexx50 Bricking Machine but with a stepped design that provides clearance below the bricking platform.

This allows teams of workers to drive support equipment such as skid steers or forklifts under the machine and easily deposit firebricks, bringing comfort and ease to workers.

Models

  • 4 to 5 meter model: Approximately 213 centimeters (84 inches)
  • 5-6 meter model: approximately 264 centimeters (104 inches)

Platform capacity and space

The Stepped Bricking Machine offers the largest capacity in the industry as well as ample deck space for bricks, personnel and tools.

  • Standard Unit: 3 meter (14 ft) long platform that can hold up to 3992 kilograms (8800 lbs)
  • Optional upgrade option: Increases capacity to 5,987 kilograms (13,200 pounds). The platform of the largest model is 5,2 meters (17,1 ft) long and can hold three brick pallets totaling 4.620 kilograms (10.185 lb).

 

Econ ring. Bricking Solutions

Bricking Machine Econ-O-Ring

The Econ-O-Ring (ECOR) is an economical machine designed to service brick lining in kilns with a brick ID of 2489mm to 3658mm (98″-144″).

ECOR is a machine with an exclusive double arch adjustable system and different hinged arch sections. This allows great adaptability to different size combinations within its range.

It is designed for smaller furnace diameters. Its manufacturing material is a light aluminum capable of being assembled in 60 minutes once it is inside the oven. Its components are small and it is manageable by two people. In addition, it has the capacity to adapt to kilns with limited access, and can also install active and insulated bricks in lime kilns.

 

Mini econ ring. Bricking Solutions

Mini Econ-O-Ring

The Mini Econ-O-Ring (MECOR) is an economical adjustable small size machine. Can service brick kiln Id from 1194 mm to 2489 mm (47″–98″). It has a single arch with an adjustable frame that allows the adaptation of different sizes within its capacity.

The MECOR was designed for combustion chambers, drying ovens, tertiary air return ducts in cement plants, satellite cooler tubes, small vessels and ovens. It is made of lightweight aluminum and is capable of being assembled in 30 minutes. It is a machine capable of being handled by 2 people.

 

Ladle torpedo. Brick Lining Machine.

Ladle torpedo. Bricking Solutions

This machine is designed for installations in torpedo ladles for the steel industry.

This replaces wood and greatly reduces setup and installation time

The machine is constructed of 6061-T6 aircraft aluminum with custom aluminum Perf-O-Grip plates and a 2722 kg net capacity aluminum frame with rails to support the trolley. Flexible, customized bow with attached hinges to allow the wings of the bow to adapt to the oven.