PremiumLine Range
Download cDemarec implement catalogs
The models in the Premium Line range incorporate the advantages of the DemaPower System:
- 4-chamber pressure cylinder instead of 2: full bite force from the start.
- Develops between 20% and 25% more closing force.
- Maintains a extremely fast opening and closing cycle: dual-action speed valve.
- Pressure maximum work 380 bar.
- More power, more speed, more tons processed per day.
Multiprocessor wrecker
MQP / DSP / DRP Model
- For excavators from 18 to 65 tons.
- Multifunctional shear with quick and safe jaw change.
- Availability of 6-8 different jaws depending on the model.
- Perfect jaw geometry for optimized performance.
- 25% more strength than standard shears.
- Superior performance compared to larger crushers.
- They have 2 pivot points.
In addition, it incorporates the advantages of the Multi Quick System:
- System quick on-site jaw change.
- It allows the operator to replace the implement's jaws. in just a few minutes.
- Without needing to abandon the work, instantly adapting to steel cutting, crushing or demolition.
Ideal for demolishing thick reinforced concrete.
concrete shears
DCC Model
- For excavators from 18 to 130 tons.
- Interchangeable tips and blades.
- Maximum closing force from start to full closure.
- High durability jaws.
- They achieve higher performance compared to larger shears.
Ideal for demolishing thick reinforced concrete.
Suitable for high-powered demolition machines.
Multifunctional scrap metal shears
DMS / DRS / DXS models
- For excavators from 7 to 90 tons.
- Multifunctional shear with quick and safe jaw change.
- Clamps for cutting reinforced concrete, scrap metal or wiring.
- Multi-arm system.
- All jaws are equipped with replaceable wear parts.
- 360° rotation.
- Perfect jaw geometry for optimized performance.
- Optimal power-to-weight ratio.
- Powerful cylinders.
- Heavy-duty motor.
Ideal for implementation in midi excavators, compact loaders or heavy machinery.
It can be used for both primary and secondary demolition work.
Also suitable for construction, recycling and scrap yards.
Rail cutters
RC Model
- For excavators from 20 tons.
- It can cut all Vignol type rails up to 900 N/mm² and profiles from “S7” to “UIC 60”.
- Unlike conventional shears, this one cuts without deforming the rail or detaching pieces.
- Extremely robust upper and lower jaws.
- Oversized pivot point.
- Reversible cutting blades – tool steel.
- Heavy-duty 360° rotation.
- Filters in the hydraulic rotation that protect the rotation circuit.
Designed for the railway sector and the cutting of scrap from railway lines.
Octopuses for scrap metal
DPG Model
- For excavators from 16 to 50 tons.
- Maximum closing force. Maximum working pressure 350 bar.
- Optimal weight-performance ratio for daily use.
- Octopuses are available with 4 or 5 teeth for the most suitable grip.
- Heavy-duty 360° rotation.
- Internal anti-breakage hoses.
- Possibility of mounting radiation detector or magnets.
- 10% weight reduction.
- 20% voltage reduction.
Demolition grapples – Rockfall grapple
DRG Model
- For excavators from 2 to 80 tons.
- They combine extra-thick side plates with split, reversible lower blades to minimize wear.
- Heavy-duty rotating motors with shock protection.
- Load safety valve
- 360° Rotation.
- Single large diameter cylinder for a powerful closure.
- The Delta-Box frame It guarantees low reaction forces at the hinge points.
Some models are suitable for underwater work.
Ideal for implementation in midi excavators and compact loaders as well as heavy machinery.
